HD 1/4 3 CMOSs camera with pan/tilt/zoom mechanism, wrapped in a sleek, compact body. Like its other family members, the BRC-300 and the BRC-H700, The BRC-Z700 can also be ceiling mounted. The BRC-Z700 supports simultaneous outputs of analog HD Y/Pb/Pr output as well as Y/C and composite in Standard Definition (SD). It is also equipped with a slot for optional cards to adapt to diverse needs. By inserting the optional BRBK-HSD1 card into this slot, High Definition SDI (HD-SDI) as well as down converted SD SDI output is possible by proper selection (not simultaneously). For HD optical multiplex remote operation, the BRC-Z700 requires a BRBK-MF1 board. Boards used with the existing BRC-H700 camera are NOT compatible with the BRC-Z700. When used with the BRU-H700 HD optical multiplex unit, the BRC-Z700 in combination with the new BRBK-MF1 board, can transmit uncompressed digital data without deterioration through the CCFC-M100HG HD optical fiber cable. The same RM-BR300 remote controller currently used with the BRC-300 and BRC-H700 cameras can also be used with the BRC-Z700. The RM-BR300 can simultaneously control up to 7 cameras from a distance. Highlights: All-in-one stylish robotic camera with a robust body 1/4- type HD 3-ClearVid CMOS Carl Zeiss Vario-Sonnar T*® Lens Built-in Auto Focus 80x zoom (20x Optical, 4x Digital) Desktop and ceiling-mount installation capable Both HD and SD outputs as standard External sync input 16 position presets RS-232C/RS-422 serial control (VISCA protocol) Daisy chain capability (up to 7 units) Silent and smooth Pan/Tilt mechanism Optical image stabilization function to reduce vibration Wide system expandability with interface card slot for optional cards Multi-function IR Remote Commander® unit OSD (On-Screen Display)